Terms and Conditions

All transactions between Boss Bunny Graphics and its clients are subject to these terms and conditions.

Boss Bunny Graphics communicates via phone calls, SMS message and email. By working with Boss Bunny Graphics, you agree to these forms of communication. Please notify us if you would prefer not to receive SMS messages or phone calls.

Any deposits or art fees paid at the time of order will be deducted from the final invoice. The design process of a project will not begin until the deposit has been received. All deposits are put toward production costs and cannot be refunded. If you cancel your order before installation, all deposits are final.
The balance is due before the project leaves our building. Boss Bunny Graphics reserves the right to charge any payment source on file for balance when project is complete.
For outstanding balances, Boss Bunny Graphics reserves the right to charge any payment source on file for balance on unpaid invoices.
Client agrees that any additional work or materials not specifically set forth in the original scope of work will be extra and shall be billed and charged by Boss Bunny Graphics. Client agrees to pay for all extras (time and/or materials) that were added to the project in full at the time of completion.
Payment forms include money order, cash, company check and debit or credit card.
All returned checks, stop payments or insufficient funds will be charged an additional $25 processing fee.
We cannot start your project, do any mock-ups or confirm installation dates until a deposit payment is made. Client or assigned contact person agrees that they are the responsible party for payment of services requested. Client or assigned contact person agrees to make full payment prior to vehicle release and agrees to be responsible for all collection fees including attorney fees and court costs for any unpaid balances at the interest rate of 18% per annum.

Refunds

Since this is custom artwork, once the job is printed, delivered, and/or installed all contracts are final and no monetary refunds can be issued.
Any materials for the customer’s job are required to be paid for 100% prior to the order before the work will be performed. The material that is ordered is non-refundable and there is a 25% restocking fee on top of the already purchased cost if you do not proceed forward with the installation.

GENERAL TERMS AND CONDITIONS, TERMS OF PAYMENT, LEGAL FEES AND DISPUTES:

Your deposit is your confirmation of the installation dates agreed. We do not lock in the installation date if the deposit is not made, therefore your agreed date can change at any time until the deposit is made. Any invoice that is not paid at the time of delivery is considered past due and the customer is responsible for all collection fees including but not limited to attorney fees and court costs for unpaid balances at the interest rate of 18% per annum. This is not an expectation contract, and we are not responsible for buyers’ remorse. By accepting the vehicle, you are accepting the job as complete, and that the performance is satisfactory. You are responsible for inspecting the product and or vehicle upon receipt. The customer shall identify to Boss Bunny Graphics in writing any dispute concerning an invoice within ten days of the date of the invoice. If disputes are not identified in writing within the ten-day time frame the customer has accepted the job and the invoice. Customer must contact Boss Bunny Graphics of any and all work in dispute, accompanied by written explanation. After investigation, if an error is found on our behalf, we will make appropriate corrections.

Created by boss bunny graphics

Client must provide accurate vehicle details (i.e. year/make/model, bed length, roof height, aftermarket parts, etc.).
Client may be asked to submit a brief form to specify vehicle details, wall measurements, or window measurements and provide initial design preferences.
Client may be asked to submit photos of vehicle or bring vehicle in for photos and measurements prior to the design process. We may also ask that you provide pictures of any windows or walls, or we may also need to come to your location to obtain physical measurements of any window(s) and/or wall(s) for your project. We recommend that walls be painted with a satin or gloss finish so that material adheres properly to the wall. Matte finish is NOT recommended.

All questions, photos, and measurements are for the purpose of providing accurate design proofs and printed artwork.
Proofs are created on a flat surface and viewed at a relatively tiny size on a computer screen. In some cases, due to curves, handles, deep grooves, rubber moldings/trim on the spot adjustments may be made at the discretion of the installer to maintain maximum readability/alignment.
Upon design approval, Boss Bunny Graphics will not be held responsible for any errors or omissions in regard to information, spelling, grammar, or design. Design errors will result in a fee to correct the file as well as reprinting fees.
Boss Bunny Graphics only guarantees final prints that are designed and set up by Boss Bunny Graphics.
Any changes requested after design approval may be subject to an additional fee.

Submitted by Client

Boss Bunny Graphics suggests clients use the following guidelines before sending any art:

For vehicle graphics, window wraps, window graphics, wall wraps, wall graphics, resolution should be at least 300 dpi at full size. Include vector files wherever possible.

Convert all type to outlines or provide font files.
For vehicle graphics, window wraps, window graphics, wall graphics, include at least 4” bleed/extra to all edges.
In addition to design files, include all original linked artwork (such as photography) as separate files.
Boss Bunny Graphics is not responsible for errors or omissions in information, spelling, grammar, or design in regard to any and all artwork submitted by the client. It is assumed that all print-ready artwork submitted to Boss Bunny Graphics by the client has been approved by client prior to submission and is production-ready.
Types of files we accept are vector: PSD Adobe Photoshop, AI Adobe Illustrator, EPS, and PDF.
Large prints will be tiled to achieve the best usage on 54” or 60” wide substrate unless specified by customer.

Boss Bunny Graphics will review submitted artwork to confirm acceptable print quality and accurate dimensions based on information received from the customer. If the artwork does not meet standards for printing, we will contact the customer to discuss solutions.

If needed, Boss Bunny Graphics can provide a copy our print standards in PDF format that you may use to set up your files.

Computer monitors vary widely in color display. The appearance of a color can change significantly from screen to print. Boss Bunny Graphics are not responsible for discrepancy in expectation and appearance of printed colors, if a printed color proof is not requested before production.
Upon request, we can provide a small, printed proof for color approval before production of full-size graphics. Samples may result in a charge for time and material.
If you need a color matched to previously printed graphics, please let us know and bring a sample to our office. We will use our color matching tools to find the best match within the capacity of our materials and equipment.
We print with CMYK ink, so we cannot match all PMS colors exactly and give no guarantees to precise color matches.
Due to the nature of CMYK ink, we cannot print fluorescent colors. If your design requires the use of fluorescent colors, speak to your sales representative or designer about a solution.
There may be small bandwidth on prints when seen close up, this is caused by the printers and cannot be avoided. All prints are meant to be viewed at 6′ for more from vehicle.
When design is approved, Boss Bunny Graphics is not responsible for typographical and color errors. All artwork remains with Boss Bunny Graphics unless customer has specifically paid for the artwork on invoice. All copyrights belong to Boss Bunny Graphics.

Installation will be scheduled after artwork is approved. Again, approval of artwork should be submitted in email to designer assigned to project.

All vehicles should be delivered to Boss Bunny Graphics clean and without wax. If vehicle has paint or body damage, is excessively dirty, or has a weak clear coat, Boss Bunny Graphics will not be held responsible for any lifting or adhesive failure that may occur in the future. It is important that all vehicles for wrapping are free of oil, wax, dust, mud and other agents that may prevent the vinyl wrap from adhering properly to the vehicle surface, scratch the paint, or cause bubbling after the wrap is installed. We conduct a vehicle inspection before installation and improper cleaning may result in a void of the warranty and up to a $50 cleaning fee.
Turnaround time is based on the availability of our installers, print production time plus bay time and space. The average time from date of final approval is 5-7 days (3-5 days to produce the vinyl graphics, 1-2 days for the installation of the graphics depending on the scope of work). This turnaround time can fluctuate throughout the year based on the seasonality of our business and Boss Bunny Graphics reserves the right to communicate with customers when a project might exceed this time frame.
WE ARE NOT RESPONSIBLE FOR THE CONDITION ON THE VEHICLE’S PAINT SURFACE PRIOR TO THE VINYL BEING INSTALLED. If installed on trailers with caulking, re-caulking will be needed since vinyl will not stick to caulk. Boss Bunny Graphics is not responsible for re-caulking.

Personal graphics

Vinyl material is a pliable plastic material that we make every effort to make look as seamless as possible, however, there may be curves, bumps, moldings and deep-channeled curves that the vinyl will not be able to conform to. In some cases, relief cuts need to be made or patches need to be installed to cover certain areas. Stretching will result in some shrinkage as it attempts to return to its original form/dimensions. As it shrinks, some minor tenting and lifting does occur and will be addressed, if necessary, at the 30-day inspection.
Emblems will be removed, when possible, and placed in customer vehicle. If customer would like emblems reapplied, this will need to be discussed at drop off. Emblems can break during the removal process.
No textured plastic, rubber, aluminum, chrome or silicone surfaces will be covered unless specifically requested and quoted.
All vinyl material needs to be applied to “like new” vehicle finish for the best results. There must be an excellent bond of the paint and its finish to the vehicle substrate. Any rust, bubbling, caulking, scratches, dents or other damage will be visible through the film, and such surface imperfections may damage the film or cause the film to fail prematurely. Areas repaired with body filler must be sanded, epoxy primed and finished with OEM (Original Equipment Manufacturer) paint or clear coat. Any recently applied finish must be fully cured for a minimum of 30 days prior to film being applied.
Door handles, mirrors, taillights, trim and other items may need to be removed during the wrap process. Boss Bunny Graphics is not responsible for any damage caused to these areas during the installation process. If you do not want these items removed, please discuss with staff at drop off.

Fleet Graphics

The application process can range 1-3 days depending on coverage amount, size of vehicle and type of material. It is not a good idea to rush the installation process as many things can go wrong. Boss Bunny Graphics reserves the right to take an additional day for improper cleaning of the vehicle before drop-off or any issues that may arise during the installation and to allow the material to cure in the sunlight.
There will be every attempt by Boss Bunny Graphics to prevent visible imperfections (zippers, bubbles, wrinkles) when standing 10′ from vehicle.
Removal of vehicle parts is not required for fleet wraps (taillights, mirrors, door handles, etc.) and can be discussed with staff upon drop off.
No textured plastic, rubber, aluminum, chrome or silicone surfaces will be covered unless specifically requested and quoted.
Painted door handles are face covered only, there will be visible body paint behind the handle.
Interior of wheel wells (area nearest tire), hinges, slider rails, latches and roof rails are not covered. Up to 1/8″ of visible body paint around trimmed areas (headlights, handles, moldings) are possible.
Emblems will be removed and placed inside the vehicle for customer. Emblems can be reapplied, if requested, and may result in an additional charge.
Commercial vehicles with knock outs/deep recessed areas, will be relief cut leaving up to 1/4″ uncovered reveal to prevent lifting.
Client also understands that unlike a paint job on a vehicle or wall, there can and will be seams, and patches that are necessary to cover entire vehicle and its contours and irregularities. Boss Bunny Graphics will do its best to install wraps as seamless as possible, however it is not guaranteed that everything will be seamless. It is also understood that upon approval of final graphic proofs, some changes to the finalized artwork may be necessary at time of installation to allow the wrap to fit the vehicle, wall or window’s shape. Client authorizes Boss Bunny Graphic to make such necessary changes.
Boss Bunny Graphics reserves the right to install all graphics as close as possible to the proof. Sometimes there will be variance in measurements compared to actual installed product. Boss Bunny Graphics will try its best to make sure that all installations are as close as possible to the original proof.
Boss Bunny Graphics does its best job to ensure that all wraps are produced to a high level of quality. Although we try our best to make sure wraps are containment free, sometimes small dirt particles may appear under the wrap that are caused by static electricity. Boss Bunny Graphics installers try their best to make sure this doesn’t happen but sometimes this is unavoidable.

Damage:

All vehicles will be subjected to a pre-installation inspection at time of drop off. Damage claims must be made within 24 hours of pick-up of vehicle. Damage claims after the 24-hour period will be reviewed on a case-by-case basis.
Any damage sustained to a vehicle prior to delivery will be noted by Boss Bunny Graphics upon delivery and such damage will excuse and invalidate the manufacturer’s warranty.
Any damage sustained to a vehicle during its time at Boss Bunny Graphics must be repaired by Boss Bunny Graphics. We reserve the right to get our own estimates for repair before the client gets repairs to make sure that we get the lowest and fairest price. Should the client have their damaged vehicle fixed without the consent of Boss Bunny Graphics, all damages claims shall be rejected. We will take no responsibility for non-approved repairs.
Customer is required to report any damaged areas that could affect the quality of the wrap before dropping off for installation. Boss Bunny Graphics shall have no obligation to install any wrap upon a damaged vehicle unless signed off by customer to do so otherwise in which case customer waives and releases us from any manufacturer’s warranty provided herein. Boss Bunny Graphics has the right to refuse any job based on vehicle conditions.
All window and wall jobs will be subjected to a pre-installation VISUAL inspection at the time of installation. Any damage found at the time of inspection will be brought to the customer's attention. Boss Bunny Graphics will not be held liable for damage claims to onsite installations 24 hours after installation.

Removals:

Boss Bunny Graphics does offer removal of existing graphics as part of their services. When removing aged vinyl, damage can be caused to the surface area the vinyl is being removed from including but not limited to pulled paint.
Clients requesting removal services will not hold Boss Bunny Graphics liable for any damage caused in the removal process.
Removal services are billed at an hourly rate. An estimated guess of hours may be provided to clients prior to scheduling removal but actual hours spent on removal of vinyl and adhesive will be reflected on final invoice.

For vehicle graphics, you will be sent home with detailed instructions on how to care for your vinyl graphics. Failure to follow these guidelines will void the warranty.

Wash Regularly

Wash whenever the car appears dirty. Contaminants allowed to remain on the graphic may be more difficult to remove during cleaning.
Rinse off as much dirt and grit as possible with a spray of water.
Use a wet, non-abrasive detergent with a soft, clean cloth or sponge.
Rinse thoroughly with clean water. To reduce water spotting, immediately use a silicone squeegee to remove water and finish with a clean microfiber cloth.
We do not recommend using wax or other similar coatings on vehicle graphics.
Any use of tire shine after the wrap has been installed, will void the warranty. Tire shine stains the wrap material and cannot be repaired without replacing the vinyl.

automated car washes

Fuel Spill

Wipe off immediately to avoid degrading the vinyl and adhesive. Then follow the “wash regularly” found at top of page.

Film Restoration – keep your vehicle wraps looking their best.

Do not use any abrasive polishes or cutting compounds.
Do not use any polishing to wax products on matte or textured films.
Use Isopropyl alcohol and water (2:1 ration) to remove waxy residue on graphics. Do not allow solution to soak and immediately rinse with clear water.

Storage – keep indoors or under cover whenever possible.

Vinyl graphics (just like paint) are degraded by prolonged exposure to sun and atmospheric pollutants, particularly on the horizontal surfaces such as hood, trunk lid and roof. Whenever possible, store it in a garage or at least in a shaded area during the day. At night, protect the car from dew or rain, which may contain acidic pollutants (a common problem in many large metropolitan areas). When a garage is not available, consider using a cloth car cover at night. If your graphics start to discolor or turn brown, immediately remove the graphics from the vehicle to avoid staining the underlying paint.

Boss Bunny Graphics will only warranty material installed on original equipment manufacturer (OEM) paint for vehicle graphics. If vehicle has been re-painted at any point, all warranties are voided. All architectural surfaces must be primed and painted before installation. All vehicle installations must be inspected at 30 days for lifting and failing of material. If this inspection is not recorded, all warranties are void.

Perforated window graphics are warrantied for one year. This includes all vehicle and all building windows.
Vertical surfaces are warrantied for three years.
Horizontal surfaces are warrantied for one year (This means roof, hood and trunk).
Architectural vertical surfaces are warrantied for one year (all windows and wall surfaces).
Vertical surface building graphics are warrantied for three years (Due to constant sun exposure). Some materials such as chrome, brushed, special effects, and non-laminated carry a one-year warranty.
All materials are subject to a manufacturer's warranty, available upon request.

Why is there a different warranty for the sides and top of vehicles? Good question, the sun’s devastating UV rays break down the surface of vinyl graphics. The top of your vehicle gets more sun exposure resulting in the graphics turning brown and cracking faster than the sides.

Should Boss Bunny Graphics’ vinyl films fail to perform or adhere correctly after specified proper use and application, Boss Bunny Graphics shall file a claim with the manufacturer of the vinyl for the defective material. Boss Bunny Graphics requires an actual sample of any vinyl film in question, photographs of failure and proof of invoice. The manufacturer will make a decision based on the evidence provided. If the claim is denied, Boss Bunny Graphics will not be held liable for any cost incurred by the purchaser. Under no circumstances shall Boss Bunny Graphics be responsible for any incidental or other damage outside of Boss Bunny Graphics’ control of the manufactured vinyl films.